Fence Hawk WT System Includes:
(1) Fence Hawk Unit
Fence Hawk High Voltage Monitor with a weather-proof transparent top which shows the full operational status of the monitor without removing the top. Click Fence Hawk Monitor Specification for further review.
-------------------------------------------------
(1) Replacement Remote Fence Unit
Replacement Remote Fence Unit pickup and is usually installed directly on the fence. It is connected to the monitor with a twisted pair (18awg - 26awg) from zero to 100 yards or more separation to the monitor.
-------------------------------------------------
The Fence Hawk vs Fence Hawk Plus.
The plus configuration has two (2) voltage level trigger points.
The standard Fence Hawk has only one trigger voltage output and adjustment. This unit has the same fence voltage circuitry as the plus version. The is the best unit in the field to determine if and how much voltage is actually on your fence.
The Fence Hawk is absolutely the best Fence voltage sensor and monitor made, designed for years of stable, reliable operation WITHOUT false alarms. It operates in concert with any brand fence charger. It does this with No False Alarms.
The Fence Hawk is guaranteed to be the most reliable electric fence monitor available. Simply because it DOES NOT FALSE ALARM for any reason including lightning, spurious voltage spikes and surges. When it Alarms your fences is down for one reason or another.
The patent-pending Fence Hawk operates on 12 volt DC or 115 volt AC using the 12 volt adapter. The power requirements for each Fence Hawk Plus that it requires 12 volts DC and draws 20 milliamperes.
The high impedence fence unit will NOT take away any energy from the fence, but only monitors the voltage.
The Fence Hawk provides one (1) electrically isolated relays with normally open contacts.
These outputs have adjustable voltage triggers combined with adjustable time delays. The Fence Hawk can be configured to be used with any brand fence charger, with almost any fence configuration, and using any fence voltage.
This the ideal fence voltage monitor for any security or livestock applications.
The Fence Hawk can accurately measure and analyze the voltage pulses from any fence charger on the market today. We have even used it to measure the spark plug voltage of a motorcycle to fine tune the bike when racing.
The Replacement Remote Fence Unit is sealed and encapsulated for all weather conditions and uses.
It is mounted directly to the high voltage fence and is connected to the Fence Hawk by a single twisted pair using 26 gauge or larger.
The Fence Hawk may be located directly adjacent to the fence, or can be remotely located up to 100 plus yards away with the correct gauge of a twisted pair. One can use 26 gauge twisted pair telephone wire for short distances up to 20-25 yards. For longer distances, example: 18 gauge twisted pair will work up to couple of hundred yards.
The hard wired logic used in this device was devised for stability, longevity, and reliability over a wide set of usage parameters.
How It Works:
NORMAL OPERATION
LED 3 - ON (power)
LED 2 - OFF
LED 1 - will flash with each fence pulse (voltage level set with VR 1)
LOW/NO VOLTAGE CONDITION/OPERATION
LED 3 - ON (power)
LED 2 - ON (5-90 second delay set by user VR 2)
LED 1 - OFF
VR 1 adjust the voltage level trigger point. (Output 1)
VR 2 adjusts the time delay before trigger relay closes (terminals 5 - 6)
Note: Click view cart in navigation menu after you finish adding the item to cart.
